Pack consisting of SUPER STAR 3900 + ASTATIC 636L-C (CHROME) microphone.
The Super Star 3900 is a 27 Mhz CB mobile radio with 40 multi-standard channels and AM/FM/USB/LSB with a power of 4W (AM/FM) and 12W in sideband (SSB). The new SuperStar 3900 maintains the essence of the classic model recognizable by its iconic design, its control buttons, the microphone input on the side, the analog meter, among others.
In 2023, the new Super Star 3900 comes with some improvements, such as: display with function indicator and screen lighting adjustment, new handheld microphone with channel change buttons (Up/Down), new board design with micro components which translates into a reduction in the overall weight: improvements that in no way alter its essence and that make the Super Star 3900 remain stronger than ever as an icon of the citizen band radio.
The Super Star 3900 has been basically designed as a mobile device, although it can also be used as a base station connected to a direct current power supply and a corresponding antenna.
FEATURES SUPER STAR 3900
- CB-27 mobile radio
- Channels: 40 Multi-standard
- Modes: AM/LSB/USB/FM
- Frequencies: 26.565 to 27.99125 Mhz
- Tx power: 4W (AM/FM) 12W (SSB)
- Handheld microphone with channel change buttons (UP/Down)
- Backlit display with channel indicator and equipment functions menu
- Standing wave meter (SWR) and power
FUNCTIONS SUPER STAR 3900
- SWR, PWR, RX RSSI meter
- PC programmable
- SQ, ASQ function
- RF gain adjustment
- Microphone gain adjustment
- Programmable roger beep
- NB/ANL function
- Command notification by beep
- TOT function
- HI-CUT function
- Busy channel lockout
- Adjusting the screen illumination
- SWR protection
- Supply voltage protection
- VOX function
- Reception noise reduction
- Transmission noise reduction
SPECIFICATIONS SUPER STAR 3900
- AM/FM/SSB modulator
- Frequency Control: PLL Synthesizer
- Frequency stability: +/- 5 ppm
- Channel spacing 10 KHz
- Operating temperature: -20º to +55 ºC
- Antenna impedance: 50 Ohms
- Antenna connector: UHF, SO 239
- Supply: 13.8 V DC
- Consumption: 5 A
- Dimensions: 287 (length) x 200 (width) x 61 mm (height)
- Weight: 1,500 g
The Astatic Model 636L-C is a noise canceling dynamic microphone for close talking, hand held applications in CB, Amateur Radio, and SSB communications The 636L-C has a rugged, dependable dynamic element (the same element used in professional two-way radio) in a classic tear-drop style housing.
The frequency response is tailored for maximum ineligibility and clarity in voice communications with a 360º minimization of background noise. A soft lip guard is positioned to assure proper close talk spacing by the operator. Molded in high impact Cycolac, The model 636L-C comes with six wire coil cord which allows for relay, electronic, or virtually any type hookup with almost any transmitter/transceiver.
The model 636L-C has a low impedance output and a long life, trouble free DPDT switch, factory wired normally open.
FEATURES ASTATIC 636L-C
- Type: Dynamic Noise Canceling
- Output Level: -58 dB (0dB = 1 mw/10 microbars); -76dB (0dB = 1 volt/microbar); -152dB EIA
- Impedance: 200 ohms, matches 50 to 1000 Ohms
- Connector: Available stripped and tinned or configured with 4 pin (DX1) DIN.
- Cable: Six wire, five conductor (one conductor shielded) coiled cord that extends to 2.3 m (7 1/2 ft.).
- Durable strain relief bushing protects against cable breakage at microphone housing
- Housing: Durable high impact molded black Cycolac
- Weight: 284 grams (10 oz.)
PACK CONTENT:
- CB Transceiver
- Handheld microphone with up/down
- ASTATIC 636L-C microphone
- Mounting bracket
- Microphone support
- Anti-slip pads
- Power cord
- Screws for mounting bracket
- Washers for mounting bracket
- Clamping screws
- Spare fuse (10 A, 250 V)
- Self tapping screws
- Flat washers
