LMR195 coaxial cable 100 meter coil

  • REF: LMR195-100

low attenuation coaxial cable

Coil of 100 meters of LMR195 low-loss* coaxial cable with 50 Ohm strong impedance, suitable for interconnection between equipment such as Routers, SDR, Walkies and antennas in general in those installations where greater flexibility is required with a thin Low attenuation cable, ideal for SMA or N type connections.

APPLICATIONS:

  • Suitable WIFI, GSM, 3G, 4G and LTE systems
  • Mobile telephone repeaters-amplifiers
  • WiFi access points
  • DEG Radio
  • Walkies and radio transceivers

FEATURES:

  • Internal conductor: Pure electrolytic copper wire, bare and polished 0.94 /- 0.015
  • Dielectric: Physical cellular polyethylene 2.79 +/- 0.10
  • Outer conductor: formed by two screens composed of a tape and a tinned copper braided mesh
  • First screen: Aluminum tape glued to the dielectric 3.55 +/- 0.15
  • Second screen: Tinned copper braided mesh
  • Braid coverage: greater than or equal to 90%
  • Polyethylene cover
  • Exterior dimensions: 4.95 +/- 0.20 mm
  • Black color

SPECIFICATIONS:

Electrical characteristics

  • RDC central conductor: < 25.5 ohms/km
  • Outer conductor RDC: <16.1 ohms/km
  • Mutual capacity: <80 nF/Km
  • Dispersion speed: 80%
  • Impedance: 50 ohms

MAXIMUM Dimming:

  • 50 MHz – 8.50 dB/100 m
  • 150 MHz – 14.60 dB/100 m
  • 450 MHz – 25.60 dB/100 m
  • 900 MHz – 36.50 dB/100 m
  • 1500 MHz – 47.70 dB/100 m
  • 1800 MHz – 52.50 dB/100 m
  • 2000 MHz – 55.50 dB/100 m
  • 2500 MHz – 62.50 dB/100 m

USUALLY PURCHASED AS A SET

Cable CELLFLEX (200 m. coil)

CELLFLEX low attenuation cable (100 meter drum)

Ref: CELLFLEX100

100m coil of low attenuation coaxial cable