The premium DIAMOND MX2000 – Triplexer Characteristics: Frequency: 1.6-60 MHz/ 110-170 MHz/ 300-950 MHz Power: – 1.6-60 MHz: 800W (PEP) – 110-170 MHz: 800W (PEP) – 300-950 MHz: 500W Connectors: Input SO-239 (PL) / Output 3 PL-259 Dimensions: 86 x 25 x 64 mm Weight: 360g is a commercial-grade, high-isolation radio frequency routing network splitter precision-engineered to deliver secure voice synchronization, simultaneous multi-band channel tracking, and professional signal path conditioning. Built by Diamond Antenna to replace clumsy physical antenna switch boxes that demand manual activation loop interventions, this premium high-compliance diplexer/triplexer assembly allows a single multi-band transceiver or up to three separate monoband radios to share a common multi-band antenna system seamlessly. It stands as an essential operational procurement asset for complex maritime shore command centers, aviation tracking stations, automated emergency backup communication repeaters, and high-volume B2B radiocommunication hardware accessories wholesale networks looking to source original factory-certified active system components.
The internal RF architecture of this high-integrity hardware component features an advanced network of low-pass, band-pass, and high-pass lumped-element LC filters housed in a robust RF-shielded chamber. This layout splits incoming signals cleanly across three distinct operational corridors spanning a target frequency: 1.6-60 MHz / 110-170 MHz / 300-950 MHz allocation matrix. The precision factory tuning ensures exceptionally high port-to-port isolation and minimal insertion loss lines across the active spectrum, preventing cross-band intermodulation, bleeding, and localized signal path degradation. This protects delicate transceiver receiver front-ends from adjacent transmitter overload during multi-frequency tracking operations.
To preserve absolute technical system alignment across heavy industrial or base station deployment schedules, the filter network is engineered with substantial thermal headroom. The low-frequency and mid-frequency bands handle an intense forward **power rating of 800W (PEP) from 1.6-60 MHz and 800W (PEP) from 110-170 MHz**, making the system fully compatible with high-power HF linear amplifiers and VHF base stations, while the ultra-high frequency block maintains a steady **500W continuous capacity from 300-950 MHz**. This high-power threshold blocks breakdown failures and dielectric heating under constant key-ups, securing stable impedance paths to safeguard your radio’s power amplifier stages from reverse-power SWR strain.
Housed inside a ruggedized, compact die-cast aluminum shield chassis measuring a tight 86 x 25 x 64 mm to eliminate external electromagnetic interference (EMI), the module clocks a solid net structural weight: 360g. The main base interface is configured with a high-retention input SO-239 (PL) female bulkhead socket, while the output array splits into 3 PL-259 male connectors pre-fitted on high-conductivity, flexible low-loss coaxial pigtail leads line. This integrated cable layout eliminates the stress of rigid direct connections and ensures quick, immediate out-of-the-box field deployment readiness for your technical hardware configurations.
Technical Specifications
| Technical Parameter | Specification |
|---|---|
| Product Brand Designation | Diamond Antenna (Original Factory Genuine Japanese Infrastructure Line) |
| Hardware Model Designation | MX2000 / MX-2000 Multi-Band Coaxial Triplexer Series |
| Primary Component Classification | RF Low-Loss Splitter-Combiner / Antenna Network Triplexer Filter |
| Splitter Passband Frequencies | • Port L (Low HF/6M): 1.6 MHz to 60 MHz continuous passband • Port M (Mid VHF): 110 MHz to 170 MHz continuous passband • Port H (High UHF): 300 MHz to 950 MHz continuous passband |
| Rated Power Handling Capacity | • 1.6 – 60 MHz (Port L): 800 Watts (800W PEP) Transmission Load Maximum • 110 – 170 MHz (Port M): 800 Watts (800W PEP) Transmission Load Maximum • 300 – 950 MHz (Port H): 500 Watts continuous duty power allocation limit |
| System Characteristic Impedance | 50 Ohm Nominal RF Link Standardization Profile |
| Primary Base Input Interface Port | SO-239 Female (UHF Threaded Low-Loss Chassis Connector Sockets) |
| Primary Split Output Interface Leads | 3x Integrated PL-259 Male UHF Connectors on Flexible Low-Loss Coaxial Pigtails |
| Filter Isolation Matrix Efficiency | High inter-port signal isolation with ultra-low insertion loss curve parameters |
| Total Measured Chassis Size | 86 mm (Width) x 25 mm (Depth) x 64 mm (Height) Compact Module Layout |
| Net Operational Hardware Mass | 360 grams (360g Balanced Shielded Mechanical Aluminum Casing Weight) |
| Verified Hardware Compatibility Scope | Multi-band HF/VHF/UHF transceivers, tri-band base station colinear antennas, SO-239 bulkhead terminals, inline SWR wattmeters, and lightning protectors |
| Primary Fleet Utility Purpose | Turnkey multi-radio station outfitting, single-antenna network tracking stabilization, passive frequency path conditioning, and receiver overload circuit protection |
