The CABLE 5M – 5 meter cable with 2 connectors for Jetfon AT2 / AT3G / AT5 repeaters is a commercial-grade, low-loss radio frequency transmission line assembly precision-engineered to maintain absolute signal integrity, high-velocity data tracking, and secure voice synchronization across cellular booster infrastructures. Built to overhaul thin, substandard jumper lines that cause critical signal attenuation and high packet dropouts, this high-shielding cable balances the interconnect lines between external capture antennas and indoor broadcast modules. It stands as an essential operational procurement asset for commercial facility management, remote warehouse depots, construction site field offices, and high-volume B2B telecommunication accessory wholesale networks looking to stock reliable, original factory matching infrastructure parts.
The advanced physical core of this 5-meter coaxial line features premium internal conductor insulation layers wrapped inside a high-density braided shielding matrix. This heavy-duty RF layer actively blocks external electromagnetic interference (EMI) and atmospheric noise from degrading the boosted cellular band field, ensuring clean line conditioning over continuous shift routines. By establishing a stable transmission path with tight system characteristic impedance tracking, the assembly allows attached wireless repeaters to maximize their effective indoor coverage footprints without creating unwanted heat buildup or feedback loops within delicate amplifier receiver blocks.
Constructed to survive demanding routing pipelines through tight building risers, drop ceilings, or wall conduits, the cable assembly spans a total fixed cable 5m – 5 meter structural length. The line features a convenient, turnkey installation pipeline, arriving completely pre-terminated with a heavy-duty, knurled 2 connectors hardware layout (standard N-Male RF connectors with robust threaded sleeves and gold-plated center pins). Specifically mapped for absolute technical compliance and certified system matching with the Jetfon AT2 / AT3G / AT5 repeaters series, this rugged interconnect cable eliminates manual field crimping mistakes and delivers out-of-the-box deployment readiness.
Technical Specifications
| Technical Parameter | Specification |
|---|---|
| Product Brand Designation | Jetfon (Original Factory Genuine Infrastructure Line) |
| Hardware Model Designation | 5M Repeater Extension Cable Assembly Matrix |
| Primary Component Classification | Low-Loss Pre-Terminated RF Coaxial Jumper/Extension Cable |
| Total Measured Cable Length | 5.0 meters (Approx. 16.4 feet) Fixed Clearance Profile |
| Pre-Terminated End Interfaces | 2x Heavy-Duty Threaded N-Male Connectors (Pre-Assembled at Both Terminal Tips) |
| Shielding & Insulation Layer | High-Density Braided Wire Foil Shield with Abrasion-Resistant Matte Black PVC Outer Jacket |
| System Characteristic Impedance | 50 Ohm Nominal Transmission Line Standardization Profile |
| Certified Repeater Interoperability | Jetfon Amplifier Models: AT2, AT3G, and AT5 Wireless Telecommunication Signal Repeater Series |
| Verified Hardware Compatibility Scope | Directional outdoor yagi/panel antennas, indoor dome/dipole broadcast panels, lightning surge protectors, N-female bulkhead joints, and radio frequency testing benches |
| Primary Fleet Utility Purpose | Turnkey building signal outfitting, telecommunication dead-zone mitigation, multi-surface cable tracking, and amplification loop protection |
