The Diamond BC200N UHF base station antenna is a commercial-grade, high-performance vertical radiation element engineered to deliver elite omnidirectional coverage and exceptional long-range link stability across the professional Ultra High Frequency spectrum. Spanning a streamlined structural layout length of 170 cm and weighing an optimized 900 grams, this premium base antenna utilizes an advanced 3 x 5/8 wave Ground Plane (GP) architectural typology enclosed in a heavy-duty FRP (Fiber-Reinforced Polymer) radome outershell. This multi-tiered stacked configuration significantly compresses the vertical radiation angle toward the horizon, making it an essential infrastructure procurement asset for municipal emergency services, commercial dispatch hubs, tactical wireless networks, and high-volume B2B radiocommunication distribution channels across European markets.
The precise electrical engineering of the Diamond BC200N features a continuous operating bandwidth spanning 430 to 490 MHz. Accompanied by an official factory field-tuning cut diagram, installation technicians can easily trim the inner elements to achieve a precise resonant frequency match with a low VSWR of less than 1.5:1. Engineered to manage punishing power thresholds up to a 200 Watts maximum power rating with a nominal 50-Ohm system impedance, it yields a powerful 6.5 dB signal gain metric to pierce through dense terrain and complex urban structures. Housed in a rigid, waterproof fiberglass structure rated for an elite wind velocity load of 60 m/sec and terminated in a low-loss N-Type Female connector interface, it includes heavy-duty mounting hardware accommodating structural mast diameters from 30 mm to 62 mm for immediate deployment readiness.
| Technical Specification Parameter | Value & Fleet Alignment |
|---|---|
| Product Brand Designation | Diamond Antenna (Original Manufacturing) |
| Hardware Model Designation | BC200N |
| Primary Component Classification | Fixed Base Station Omnidirectional Vertical Antenna with Ground Radials |
| Antenna Wavelength Typology | 3 x 5/8λ Ground Plane (GP) Wave Array Matrix |
| Primary Radome Construction | Heavy-Duty FRP (Fiber-Reinforced Polymer) Outershell |
| Operational Frequency Spectrum Range | 430 MHz to 490 MHz (UHF Commercial/Amateur Spectrum) |
| Tuning Optimization Mechanism | Included Factory Cut Tuning Diagram for custom frequency calibration |
| Antenna Radiation Gain Metric | 6.5 dB High-Aperture Signal Gain Boost |
| Maximum Input RF Power Rating | 200 Watts Continuous Peak Capacity |
| System Characteristic Impedance | 50 Ohms Nominal Optimization |
| Voltage Standing Wave Ratio (VSWR) | Less than 1.5:1 Tuned Bandwidth Minimum |
| Primary RF Interface Connection | N-Type Female Connector Socket |
| Environmental Wind Resistance | Supported Wind Velocity up to 60 m/sec. Maximum Load |
| Mast Mounting Bracket Tolerance | Fits structural poles from 30 mm to 62 mm in diameter |
| Total Physical Height Length | 1.70 Meters (170 cm Total Structural Radome Profile) |
| Net Component Mass Weight | 900 grams Lightweight Technical System Weight |
