The Alinco DJ-X100E multi-mode digital scanner receiver is an impressive device that meets a variety of communication needs. It covers VHF/UHF frequencies from 30 to 470 MHz and offers an exceptional sensitivity profile, ensuring reliable reception on multiple bands. Users can easily navigate their preferred frequencies thanks to its large memory capacity of 999 channels, 50 programmable scan sets, and 26 banks. The offset step function simplifies frequency tuning, making it easy to use for both beginners and experienced amateurs. This scanner receiver excels at audio clarity thanks to its DSP processing for analog AM and FM signals. Users can enjoy a smooth listening experience, whether monitoring communications or tuning in to FM radio broadcasts.
FEATURES:
- Frequency Range: 30-470 MHz (WFM: 76-108 MHz)
- Frequency Hopping: 1/3.125/5/6.25/8.33/10/12.5/15/20/25/30/50/100/125/200kHz
- Number of Memories: 999
- Reception Modes:
Analog: FM/NFM/AM/NAM/WFM
Digital: DCR/DMR/NXDN/dPMR/D-STAR/C4FM(DN)
Data: AIS/ACARS/12kIF(W)/12kIF(N) - Power: 3.6V Li-ion battery 3120 mAh (EBP-114A)
- Protection rating: IP67 (dust and water resistant)
- External power supply: USB Type-C (5V)
- Consumption:
Standby: Approx. 150mA (BS ON, backlight, FM mode, GPS OFF)
Standby: Approx. 300mA (Backlight/WFM mode OFF, GPS ON)
Reception: Approx. 500mA (FM rated output, backlight/WFM mode OFF, GPS ON) - Temperature: Reception: -20℃ to +60℃ / Charging: +10 to +40℃
- Dimensions: 58 x 110 x 32.5 mm (without antenna)
- GPS: Built-in for position-based scanning
- Weight: 260g (including antenna and EBP-114A battery pack)
- Reception:
- [FM/AM/Digital/Data] Triple-conversion super heterodyne
1st IF: 243.95MHz
2nd IF: 50.85MHz
3rd IF 450kHz - [WFM] Direct conversion
- Sensitivity:
FM/NFM: ≦ -10dBμV (12dB SINAD)
AM/NAM: ≦2dBμV (10dB S/N)
T98: ≦ -10dBμV (BER 1%)
DMR: ≦ -7dBμV (BER 1%)
D-STAR: ≦ -10dBμV (BER 1%)
C4FM(DN): ≦ -7dBμV (BER 1%)
AIS: ≦ -5dBμV (BER 1%, 162MHz)
WFM: ≦ -2dBμV (12dB SINAD) - Audio:
Internal speaker: 400mW (10% distortion / 8Ω)
External output: 40mW (10% distortion / 32Ω)
INCLUDE:
- 1 ALINCO DJ-X100T/E transceiver
- 1 antenna (A-295)
- 1 battery (EBP-114A)
- 1 belt clip (EBC-65)
- 1 adapter (EDC-352)
- 1 USB cable (EDS-39)
