- Working frequency: 25 – 30 Mhz
- Number of channels: 90
- Minimum SWR in the center of the band: 1.0
- Length: 155cm (with base)
- Impedance: 50 Ohm
- Maximum power: 600W
- Material: stainless steel
- Vertical polarization
- Working distance: 15km.
- Magnetic base: 145 mm.
Package includes:
- Antenna
- 4m. RG-58 cable
- PL-259 connector
- Magnetic base
 |
PerformancesThe performance of the PNI ML160 product is closely related to the technical characteristics of the antenna under ideal conditions of installation and use: SWR <= 1.1, maximum applied power 600 W, impedance of 50 ohms, stainless steel, etc. |
Communication distanceCommunication distance is another decisive factor in acquiring and using a CB antenna. In this way, the maximum communication distance of 15 km or more is achieved under ideal working conditions: calibrated antenna, open field without obstacles, station with maximum legal power of 4 W and standard reception. Any obstacle such as hills, mountains, buildings, walls can reduce this distance. |
 |
 |
LengthThe length of the PNI ML160 antenna is another very important factor that can influence the communication distance in traffic. The longer the antenna is, the greater the communication distance / operating radius. |
Complete packageThis antenna is ready for package mounting: antenna, magnetic base, honeycomb calibration. All you have to do is mount the magnetic base, connect it to a CB radio station, and calibrate it for maximum performance. |
 |
 |
Magnetic baseThe magnetic base in this package is provided with a 4m cable, enough to place the antenna in the dome, and a diameter of 145mm with a powerful magnet that provides stability to the antenna even at very high speeds. |
