Microphone for CB PNI HP 6500 and HP 7120 CB stations with programmable echo and roger beep mode
Echo and roger beep mode pre-installedThe echo and roger beep module pre-installed in the microphone has the following main functions: |
 |
 |
Custom Roger Beep EffectConnect a USB cable to the micro USB socket on the internal microphone board and to a computer and copy the custom audio file (MP3 or WAV, maximum duration 1.5 seconds) according to the instructions in the manual. As a result, at the end of each broadcast, it will also broadcast the custom audio cue that other CB users will receive as an end-of-broadcast warning. |
CompatibilityThe PNI Echo One microphone is compatible with CB PNI Escort HP 6500, PNI Escort HP 7120, PNI Escort HP 6550 radio stations and any CB station with RJ11 connector with 5V output voltage on PIN 4. Add these two new features to your station and you will make a difference: your received voice will be distinguished from the others by the echo effect, and the end of your broadcast will be marked by an original audio signal. |
 |
 |
Echo settingsEcho adjustments can be made using the 2 potentiometers on the microphone board, with the help of a small ceramic screwdriver. Setting 1: Here you can adjust the duration of the echo. Modify and test repeatedly until you get the desired result. Setting 2: Here you can set the number of echo repetitions per second. Modify and test repeatedly until you get the desired result. |
Connect to the computer and copy the custom sound
In order to write another sound (beep of maximum 1.5 seconds) in MP3 or WAV format, you need to connect the microphone via a micro USB-USB cable to the laptop (computer) and turn on the power switch (position “Open” ).
In a few seconds, the laptop will find xx MB memory, then when copying, transfer the file to the module memory.
Do not forget to return the module switch to the initial working position.
