Characteristics:

  • Working frequency: 26-28 Mhz
  • Maximum applied power: 500W
  • Minimum SWR in the center of the belt: less than 1.2: 1
  • Length: Tip length: 750 mm. Antenna length: 900 mm.
  • Impedance: 50 ohms
  • Material: stainless steel
  • Connector tip: PL259
  • Weight: 337 g
  • Dimensions: 44 x 44 x 900 mm.
  • Polarization: Vertical
  • Operating temperature: -26 ° C ~ + 60 ° C

Package includes:

  • Radio station antenna

Details:

LED coil

PNI LED 2000 brings an innovative element in the field of CB antennas: the coil of the antenna turns on when the station broadcasts. The higher the emission power, the higher the light intensity of the LED.

Performances

The performance of the PNI LED 2000 antenna is closely related to the technical characteristics of the antenna in ideal mounting and use conditions: SWR <1.2: 1, maximum applied power 500 W, impedance 52 Ohms, stainless steel, etc.

Communication distance

Communication distance is another deciding factor when choosing a CB antenna. Thus, the maximum communication distance of 10 km is reached under ideal working conditions: calibrated antenna, open field without obstacles, the station with the maximum legally permitted power of 4W and with standard reception. Any obstacle such as hills, mountains, buildings can reduce this distance.

Length

The length of the antenna is another important factor that can influence the communication distance. Therefore, the longer the antenna, the greater the range. PNI LED 2000 has a length of 90 cm (coil + pin).

Necessary accessories

To use the PNI LED 2000 antenna, you must meet the following system requirements:- a magnetic PL base with a cable long enough to mount the antenna on the dome of the car and the PL259 socket to connect the antenna to the CB station.- or a fixed bracket mounted on the car / truck with mounting cable and connection to the station such as the PNI T601 connection cable.