The AnyTone AT-5100BT is a high-performance mobile and base station transceiver engineered for the 10-meter amateur radio band (28.000 to 29.700 MHz). Operating across all major analog modulation modes (AM, FM, USB, LSB, CW, and PA), it combines a robust power stage (delivering up to 30 W FM, 30 W PEP SSB, and 10 W with 35 W PEP on AM) with factory-integrated Bluetooth wireless capability.
Designed for an advanced user experience both inside a vehicle and at the base station ham shack, the AT-5100BT comes standard with a remote Bluetooth wireless PTT button designed to mount directly onto the steering wheel, allowing hands-free operation and safe driving. It features a multi-color backlit LCD screen with user-selectable display colors (white, red, green, blue, cyan, purple, and yellow), advanced interference filters (Noise Blanker, ANL, Hi-Cut, and 5-level RX/TX digital NRC noise reduction), an onboard S/RF and standing wave ratio (SWR) meter, continuous VFO tuning, and an independent multi-mode Clarifier with separate RX and TX frequency offsets.
Key Advantages
- Bluetooth Connectivity and Wireless PTT: Includes a remote wireless PTT switch for steering wheel attachment to promote safe, compliant mobile operation.
- Comprehensive Multi-Mode Operation: Full coverage across AM, FM, Upper Sideband (USB), Lower Sideband (LSB), Morse Code (CW), and Public Address (PA) modes.
- High RF Output Power: Provides up to 30 W in FM, 30 W PEP in SSB, and 10 W (35 W PEP) in AM backed by an efficient rear heat sink.
- Advanced Acoustic Filtering & NRC: Features NB, ANL, Hi-Cut, and active 5-level digital noise reduction (NRC) on both RX and TX paths to pull weak signals from the noise floor.
- Active Circuit Protection: Equipped with automatic high SWR antenna protection and DC over-voltage shut-off circuitry.
Recommended Applications
Mobile Vehicle Communications
Its compact chassis and included Bluetooth steering wheel PTT enable a clean installation in passenger cars, vans, or 4×4 vehicles without loose cabling around the controls.
Amateur Radio Base Station (Ham Shack)
Powered by a steady 13.8 VDC supply, it performs reliably as a desktop transceiver with smooth VFO tuning, memory channels, SSB Clarifier, and a rear CW key socket.
10-Meter DX Long-Distance Operations
Takes full advantage of sporadic-E ionospheric openings on the 28 MHz band with the high efficiency and punch of 30 W PEP Single Sideband (SSB).
Technical Specifications
| Feature | Specification |
|---|---|
| Brand and Model | AnyTone AT-5100BT |
| Frequency Range | 28.000 MHz – 29.700 MHz (10-meter amateur band) |
| Operating Modes | AM / FM / USB / LSB / CW / PA |
| Transmitter RF Power | AM: 10 W (35 W PEP) | FM: 30 W | SSB: 30 W PEP |
| Tuning Steps | 10 Hz / 100 Hz / 1 kHz / 5 kHz / 10 kHz / 100 kHz / 1 MHz |
| Wireless Connectivity | Built-in Bluetooth (2402.0 – 2480.0 MHz) with remote PTT support |
| Selective Calling Codes | CTCSS (38 tones) and DCS (104 codes) |
| Audio Filters | 5-level RX/TX digital NRC, Noise Blanker (NB), ANL, and Hi-Cut |
| Supply Voltage | 13.8 VDC nominal (±15%) |
| Current Consumption | Up to 10 A during transmission with modulation |
| Antenna Impedance | 50 Ω unbalanced (SO-239 / UHF female socket) |
| Microphone Port | Front-panel circular 4-pin metal connector |
| Dimensions & Weight | 187 (D) x 175 (W) x 53 (H) mm | Approx. 1.5 kg |
Key Highlights
- 10-meter amateur mobile transceiver covering 28.000 to 29.700 MHz (licence required).
- Integrated Bluetooth module with supplied wireless remote PTT button.
- Supports AM, FM, USB, LSB, CW telegraphy, and PA public address modes.
- Adjustable RF power output up to 30 W protected against high antenna SWR.
- Precision multi-step Clarifier (±500 Hz / ±5 kHz) for fine SSB tuning.
- Adjustable digital NRC filter to eliminate acoustic cabin noise and channel static.
- Built-in real-time S/RF signal meter and SWR standing wave meter on display.
- Echo function, programmable Roger Beep, Dual Watch (DW), and priority emergency channel.
- High-contrast LCD screen with 7 selectable backlight colors and dimmer control.
- Rear USB-C programming interface for CPS computer parameter management.
Package Contents
- 1x AnyTone AT-5100BT Mobile Transceiver.
- 1x Handheld Dynamic Microphone with PTT and UP/DN buttons (4-pin connector).
- 1x Wireless Bluetooth PTT Button.
- 1x Mobile Mounting Bracket.
- 1x Microphone Hanger with Hardware.
- 1x 13.8 V DC Power Cable with Inline Fuse Holder and 10 A Fuse.
- 1x Spare Replacement Fuse.
- 1x Mounting Hardware Pack (Adjusting knobs, self-tapping screws, and lock washers).
- 1x Multilingual User Instruction Manual.
Frequently Asked Questions
Does this radio require an amateur radio licence to transmit?
Yes. Operating within the 10-meter amateur radio spectrum (28.000–29.700 MHz) with powers up to 30 W requires a valid amateur radio licence issued by telecommunications authorities.
How is the transceiver connected to a vehicle or base power supply?
It operates from a nominal 13.8 VDC supply. In a vehicle, it should be wired directly to the 12 V battery paying close attention to polarity (red wire to fused positive, black to ground/negative). For base shack operation, use a regulated 13.8 VDC power supply delivering at least 10–12 A continuous.
What type of antenna connection does it use?
It features a standard 50-ohm SO-239 (PL-259 compatible) female socket on the rear panel. Ensure the connected 10-meter antenna is properly resonant to keep SWR at safe operating levels.
