PNI CHG300 30W Dual-Port USB Wall Charger – Professional USB-A and USB-C Fast-Charging Power Adapter with PD3.0, PPS, and QC3.0

The PNI CHG300 is a high-performance, professional-grade dual-port USB wall charger engineered to deliver fast, safe, and highly efficient power delivery for modern workspace environments. Equipped with both a USB Type-C and a USB Type-A port, this compact power adapter outputs a maximum of 30W / 3A, making it an essential asset for charging corporate smartphones, tablets, fleet walkie-talkies, and low-power laptops. Whether your operations utilize iOS, Android, or specialized radio transceivers, the CHG300 streamlines infrastructure management by consolidating multiple chargers into a single high-speed wall outlet accessory.

		Power adapter with USB Type C and USB Type A USB charging adapter with two ports, USB-A and USB-C, with a maximum output of 30W 3A that supports charging two devices separately or simultaneously (5V 3.4A max 17W). The smart IC can automatically detect the devices connected to each port, identifying the proper voltage and amperage to charge each device at full speed. USB-C: 5 V 3 A, 9 V 3 A, 12 V 2.5 A, 15 V 2 A, 20 V 1.5 A – 30 W max. PPS: 3.3 V-11 V/3 A, 30 W max. USB-A: 3.6 V-6 V 3 A, 6 V-9 V 2 A, 9 V-12 V 1.5 A, 15 V 2 A, 20 V 1.5 A – 30 W max. USB-C+USB-A: 5 V 3.4 A, 17 W max.
	PD3.0, PPS and QC3.0 With PD3.0, PPS, and QC3.0 charging technologies, this USB wall charger gives all USB-C and USB-A devices (including iOS and Android smartphones, laptops, and more) an amazing boost in speed of load. Charge compatible devices up to 3 times faster than conventional charging. The USB-C port is compatible with QC2.0, QC3.0, PD2.0, PD3.0 and PPS. The USB-A port is compatible with QC2.0 and QC3.0.
		Protection measures Protection measures (over current/over voltage/short circuit/fire resistance) ensure the safety of you and your device. In addition, charging will stop automatically when devices are fully charged.

At the core of the PNI CHG300 is an advanced **Smart IC microprocessor** that dynamically monitors multi-device power allocation. When charging a single device through either port, the adapter delivers up to a full 30W of tailored power. When both ports are utilized simultaneously, the internal circuit shifts to a safe shared distribution mode, capping total output at 17W (5V / 3.4A) to prevent thermal overload. Built with fire-resistant composite materials and a rugged outer housing, the charger incorporates multi-layered safety mechanisms including automatic short-circuit cutoff, over-current limits, and over-voltage suppression to protect expensive connected hardware assets.

Key Features

• Dual-Port Layout: Features independent USB Type-A and USB Type-C output sockets to service modern and legacy electronic fleets concurrently.
• 30W Ultra-Fast Charging: Delivers up to 30W of dedicated output power to charge compatible equipment up to 3 times faster than standard 5W power blocks.
• Universal Protocol Support: Universally compatible with Power Delivery (PD3.0/PD2.0), Programmable Power Supply (PPS), and Quick Charge (QC3.0/QC2.0) architectures.
• Smart IC Auto-Detection: Integrated intelligent chip scans connected loads to automatically negotiate the optimal, safest voltage and amperage curves.
• Industrial-Grade Safety Suite: Built-in safeguards defend against over-current, over-voltage, thermal overload, and short-circuits with an automatic full-charge shutdown feature.
• Fire-Resistant Housing: Molded from premium flame-retardant polymers to ensure safe, continuous operation in office, industrial, and residential settings.

Technical Specifications

Package Content

• 1x PNI CHG300 30W Dual-Port USB Wall Adapter